Asbestos resists heat and fire and insulates well, so for most of the 20th century it went into a wide range of building products. Many buildings put up before the 1980s may contain asbestos, and fire doors are one of the less obvious places to find it.
Fire-rated doors became standard under building and fire codes in the early 1900s. Asbestos was a common core material because it does not burn, and as industry grew, makers used it in more and more fire- and heat-resistant products.
U.S. asbestos use peaked in 1973, at about 803,000 metric tons. By then, company records show that some asbestos makers had known about the dangers for decades and kept that knowledge from workers and the public. Those records came out in asbestos lawsuits.
Asbestos has never been completely banned in the United States, but it is rarely used in products today, and the last U.S. asbestos producer stopped operating in 2002.
Asbestos in fire doors
Many fire doors made before the 1980s had an asbestos core, such as asbestos board or millboard, inside a wood or metal skin. Patents show how these doors were built. A 1976 patent assigned to Champion International describes a three-hour fire door with a mineral core made with "asbestos fiber binder," wood edges, cross bands of cement-asbestos board, and wood veneer faces.
Asbestos fire doors were used for safety, but created other dangers
Fire doors are found in stairwells, exit corridors, boiler and mechanical rooms, and between sections of a building, where they help keep a fire from spreading.
Use of asbestos cores declined in the 1970s and 1980s as manufacturers switched to other mineral materials. There is no cutoff year that guarantees a door is asbestos-free. A label on the edge of the door sometimes names the maker or the fire rating, which can help identify it, but labels were often painted over or removed. If you don't know what is inside an older fire door, assume it may contain asbestos until a test shows otherwise.
What if an old fire door is still in place?
An intact fire door releases few fibers. The danger comes when the core is disturbed: drilling for locks, closers and hinges, trimming the door to fit, or breaking it apart during demolition. Most exposure from fire doors happened during that kind of work, often by carpenters, locksmiths and demolition crews who didn't know what they were cutting into.
Don't drill, cut, sand or repair an older fire door you think may contain asbestos, and never use power tools on it.
Leave it alone, or call a professional
For building owners, intact fire doors are usually left in place and managed rather than removed. If a door is damaged, or work on it can't be avoided, have it inspected by a trained and accredited asbestos inspector. If it needs to be repaired or removed, use a trained and accredited asbestos contractor and have it replaced with a modern fire-rated door.
Removing asbestos fire doors
A damaged or broken asbestos fire door can release fibers into the air. An asbestos air test can help show whether fibers are in the air.
If you think a fire door contains asbestos:
- Assume that it does. Don't drill into it or try to remove it yourself.
- If the door is damaged or you see dust or crumbled material around it, keep people away and have an accredited asbestos inspector take samples for an accredited laboratory. Don't take samples yourself.
- Unless asbestos has been ruled out, have any repair or removal done by a licensed or accredited asbestos contractor. Ask for air monitoring during and after the work.
- Make sure the contractor cleans up with wet methods and HEPA-filtered vacuums, never a regular vacuum or dry sweeping.
Rules for asbestos work vary by state. Federal law doesn't require accredited contractors in single-family homes, but some states and cities do, and commercial buildings fall under federal and state asbestos rules.
Like many other asbestos building products, fire doors made with asbestos are still in homes and buildings today. The safest approach is caution: leave intact doors alone and call in professionals before any work.
If you may have been exposed to asbestos, speak with your healthcare provider about your exposure history. Learn more about asbestos-related diseases.
Were you exposed?
If you installed, drilled or tore out fire doors, or did other construction or maintenance work around asbestos for months or years, see Were you exposed? What your risk really is, and a free health test. If you had real, repeated exposure, ask about our free asbestos health test: a chest X-ray read by a B-reader, with a CT scan if needed, and a doctor's exam and breathing test if the X-ray shows signs of asbestos damage. It is not a diagnosis and not a test for mesothelioma. Call 833-4-ASBESTOS.
Our take
What this means if you have, or may have, an asbestos claim
An intact fire door in your building is a question for whoever manages the property. Where fire doors matter for claims is the work: carpenters, locksmiths, maintenance crews and demolition workers who drilled, trimmed and broke apart asbestos-core doors, often without knowing what was inside. If that was your job, the maker's name from a door label, and the buildings and years you worked on, can help a lawyer trace which companies made those products. Tell your doctor about the work too. See carpenters and construction workers.
Read something that sounds familiar? Free case review. No records or product names needed, and no fee unless we recover compensation for your family.
Sources
- ACL Library Lexicon: Fire Door
- US Patent 3,994,110, Three hour fire resistant door, panel or building element (Champion International, 1976)
- National Cancer Institute, Asbestos Exposure and Cancer Risk
- USGS, Mineral Commodity Summaries 2025: Asbestos
- EPA, Protect Your Family from Exposures to Asbestos
- EPA, Actions to Protect the Public from Exposure to Asbestos
- OSHA asbestos standard for construction, 29 CFR 1926.1101
This post is news and commentary, provided for general information. It is not legal advice and does not create an attorney-client relationship.